Incubators

Carbolite's Laboratory Incubators have been engineered and constructed for long term accuracy and reliability. Our incubators are used for a variety of different applications including: Bacterial Research, Curing, Tissue Culturing and Drying and Staining procedures.  All units have an integral sealed glass door to facilitate product inspection and are designed for long term accuracy and reliability.

Peak Series Incubators

Carbolite's Peak Series Laboratory Incubators have a maximum operating temperature of 80°C and a minimum operating temperature 10°C above ambient.  These laboratory incubators are available in either a mechanical convection or gravity convection design.  A wide choice of control and programming options are available. The 400 & 800 liter capacities are floor standing models.

Heat up times are excellent and temperature stability with microprocessor three term control varies from ±0.2°C to ±0.5°C, depending on the model type.

The outer cases are fabricated from corrosion resistant zinc coated mild steel and finished in two tone, hard wearing stoved epoxy/polyester coating. The inner case is constructed from polished stainless steel. All units are provided with non-tilt bright nickel wire plated shelves with multi-position settings for convenient loading and unloading.

Cooled Incubators

Carbolite's Cooled Laboratory Incubators are designed for those whose process requires a temperature below ambient.  These Laboratory Incubators are constructed with a hermetically sealed refrigeration system and are designed with an operating temperature range from 0°C up to 60°C.  The Incubators powerful fan and air guide system provide an excellent temperature uniformity of ±01.0°C at 37°C and their insulation design provides excellent temperature uniformity.  Each incubator is supplied with non-tilt nickel plated wire shelves with multi-position settings for convenient loading and unloading.